K-Tuned's 72mm Drive By Wire Throttle Body is direct bolt on to RBC/RRC manifolds and others with the same bolt pattern.
- It is a true 72mm bore which is larger than ZDX throttle at the butterfly.
- This throttle body requires some form of engine management (Flashpro or Ktuner) to properly manage the increased airflow.
- We used the stock configuration and design using an OEM connector to avoid jumper harness.
- This gives it an almost OEM look when installed.
- Inside you will see the machined 72mm bore and brass butterfly.
- There are two 1/8NPT vacuum ports on the bottom which can be used for evap, brake booster, or vacuum reference.
- Included you will get a thermal gasket, mounting bolts, and two 1/8NPT plugs.
- The inlet will use a 3" silicone coupler. You may need to change the coupler to match your intake.